W.S.Connelly & Co, Inc. W.S.Connelly & Co, Inc.
Products

Turbidity Barrier Type IIproduct catalog

Turbidity Barrier Type IIProduct Type: Erosion and Sediment Control
Product LabelTurbidity Barrier Type II is a BMP designed to restrict the flow of sediment-laden stormwater runoff from a construction site, to keep it contained in a limited area, and allow the sediment to settle out before being carried into adjacent or joining watercourses. TOUGH GUY Turbidity Barriers are manufactured by AER-FLO, Inc., the world's largest producer of these critical devices. FLOATING TURBIDITY BARRIERS consist of a top flotation boom, an impervious fabric curtain extending downward under water, and a heavy galvanized steel chain sealed into a hem along the entire bottom of the curtain to provide ballast to keep the curtain vertical in the water. End hems are sealed around a rope and grommeted to allow attachment to each other with rope or bolt/nuts/washers. Color is Tough Guy Yellow.

Type II is the work horse of the TOUGH GUY¨ line. It has a top load cable and special stress plates for reinforcing the corners and is designed to handle more severe conditions. It is recommended for lakes, streams, intercoastal and tidal areas where current velocities up to five feet per second are expected. The anchorage and installation must be designed to meet the site conditions. Contact Aer-Flo Canvas Products, Inc. or a qualified engineer for assistance when extraordinary site conditions are encountered. Barrier sections are connected by rope lacing or nylon ties which must be furnished by others.

W.S.Connelly & Co, Inc.
101 Madison Ave
Roanoke , Virginia 24027
Phone: 540-344-2699
Fax: 540-343-1484

Copyright © 2017, W.S.Connelly & Co, Inc.     All Rights Reserved.

Home  ~  Products  ~  Blog  ~  Media  ~  Contact  ~  Login  ~  Terms of Use  ~  Privacy Policy