W.S.Connelly & Co, Inc. W.S.Connelly & Co, Inc.
Products

Turbidity Barrier Type Iproduct catalog

Turbidity Barrier Type IProduct Type: Erosion and Sediment Control
Product LabelTurbidity Barrier Type I is a BMP designed to restrict the flow of sediment-laden stormwater runoff from a construction site, to keep it contained in a limited area, and allow the sediment to settle out before being carried into adjacent or joining watercourses. TOUGH GUY Turbidity Barriers are manufactured by AER-FLO, Inc., the world's largest producer of these critical devices. FLOATING TURBIDITY BARRIERS consist of a top flotation boom, an impervious fabric curtain extending downward under water, and a heavy galvanized steel chain sealed into a hem along the entire bottom of the curtain to provide ballast to keep the curtain vertical in the water. End hems are sealed around a rope and grommeted to allow attachment to each other with rope or bolt/nuts/washers. Color is Tough Guy Yellow.

Type I is the most frequently specified barrier in the TOUGH GUY line. It is recommended for construction sites located in protected areas that are exposed only to light winds and to current velocities of less than one foot per second. This type of site may include ponds, shallow lakes, small streams and marshes. Anchorage consisting of stakes or concrete blocks may be required to maintain the barrier in its required position. Barrier sections are connected by rope lacing or nylon ties which must be furnished by others.

W.S.Connelly & Co, Inc.
101 Madison Ave
Roanoke , Virginia 24027
Phone: 540-344-2699
Fax: 540-343-1484

Copyright © 2017, W.S.Connelly & Co, Inc.     All Rights Reserved.

Home  ~  Products  ~  Blog  ~  Media  ~  Contact  ~  Login  ~  Terms of Use  ~  Privacy Policy